2019 Nitro ZV19 Pro

• Length:18' 11"
• Length: 18' 11"
• Beam: 8' 6"
• Bottom width: 6' 4"
• Max. recommended HP: 225 HP
• Fuel capacity: 45 gal.
• Max. person capacity: 6 persons
• Max. person weight: 1050 lbs.
• Max. person, motor & gear weight: 2000 lbs.
• Interior depth: 25.5"
• Transom height: 25"
• Deadrise: 17 degrees
• Draft: 19.75"
• Average dry weight: 2300 lbs.
• Average package weight: 4500 lbs.
• Package height: 7' 2"
• Package width: 8' 6"
• Towing length: 26' 7"
• Storage length: 22' 7"

Pro

• Bow Humminbird® HELIX™ 9 DI G2N RAM®-mounted fishfinder w/MEGA Down Imaging, CHIRP Digital Sonar & GPS
• Console Humminbird® HELIX™ 12 SI G2N RAM®-mounted fishfinder w/MEGA Down Imaging, CHIRP Digital Sonar & GPS
• Minn Kota® Ulterra™ 36V, 112-lb. (50.80 kg) thrust, 60" (1.52 m) shaft trolling motor w/Universal Sonar 2 & i-Pilot® Link™
• 3-way Ethernet communication between bow & console fishfinders & trolling motor
• Walk-thru windshield (or optional plexiglass windscreens)
• Factory-applied keel protector
• Kicker stereo system w/speakers
• 4-bank, 30-amp battery charger
• 1 extra SRM29 trolling battery
• Retractable transom trailer tie downs

Comfort, Convenience & Peace of Mind

• NMMA® certified
• Flotation meets or exceeds NMMA® & U.S. Coast Guard requirements
• EPA-compliant fuel system
• Gunnels designed to maximize interior space & fishing room
• 3 stainless steel drink holders
• 4 stainless steel pull-up cleats
• Stainless steel bow & stern eyes
• Fold-down 4-step stainless steel reboarding ladder
• Passenger grab handle
• Fire extinguisher
• Horn

Livewell System

• Bow 5.5-gal. (20.82 L) insulated baitwell w/removable bucket
• Aft 26-gal. (98.42 L) insulated Guardian™, anti-slosh & rotomolded livewell w/removable divider, bait bucket & rounded corners
• Two 500 GPH (1,892.71 LPH) aerator/fill pumps w/timers (1 for baitwell, 1 for livewell)
• Two 750 GPH (2,839.06 LPH) recirculator pumps w/timers (1 for baitwell, 1 for livewell)
• Pump-out systems (baitwell & livewell)
• Livewell lid latching to keep lid closed at speed & in rough conditions
• Insulated aluminum lids w/welded corners

Trolling Motor

• Quick-release bracket for Minn Kota® or MotorGuide® trolling motor
• Pedal recess that will accommodate Minn Kota® or MotorGuide® trolling motor pedal

Console

• Hydraulic steering w/custom tilt wheel
• Custom-molded port & starboard modular consoles w/2-tone gelcoat scheme
• Oversized carpeted, lockable port glovebox
• Below-console footrest w/non-skid mat
• Port & starboard below-console shelves
• Helm below-console recess for optional Hot Foot™ pedal
• Veethree® multifunction instrumentation gauges w/speedometer/fuel gauge, tach/trim gauge, voltmeter gauge & water pressure gauge
• Waterproof, capacitive touch digital keypad
• Side-mounted LED courtesy light
• Space to mount additional electronics

Interior

• Bike seat w/pedestal
• Folding molded fishing seat w/pedestal
• Z-Core™ seating system w/Force Flex suspension & contoured, rotomolded frame for driver & passenger seats
• Stainless steel bow & aft rails (port & starboard)
• Port & starboard bow lockers w/lift assists
• Port bow cooler w/removable tray
• Bow & aft lockable storage compartments
• 3-level center rod locker for rods up to 8' (2.44 m) w/NEW tapered rod tubes to protect rod tips
• Step to bow deck w/storage for two 3600 tackle boxes
• Extra-large integrated port net holder
• Midship in-floor storage for batteries
• Starboard tool holder
• 2 lift-out, molded aft storage boxes that will each accept seven 3700 tackle trays
• Easy access to rigging & pumps
• Insulated aluminum lids w/welded corners
• 24-oz. (.68 kg) plush, marine-grade, cut pile carpet on decks & floor
• Room to RAM-mount additional electronics at bow
• Stainless steel lockable compression latches

Performance

• Deep V performance hull
• 10" (25.4 cm) adjustable jack plate
• Lifting strakes to maximize overall handling & performance
• Transom designed for Kicker motor application
• Rigging tube
• Stainless steel propeller

Construction & Exterior

• 100% composite deck core w/superior thermal stability & strength-to-weight ratio
• Deck & hull chemically bonded & mechanically fastened
• Gelcoated stringer/liner system
• Foam-filled hull for optimal buoyancy & safety
• Full-width fiberglass-encapsulated composite transom
• Hand-laid, heavy-duty performance hull w/reinforced sides

Electrical

• Bow panel w/trolling motor receptacle, navigation light, anchor light & trim switches
• Heavy-duty Interstate® 31M-AGM starting battery
• 2 heavy-duty Interstate® Series SRM-29 trolling batteries
• 6-gauge trolling motor wiring w/50-amp circuit breaker
• 2 automotive style, labeled fuse panels w/cover
• Manual LED-lighted bow storage compartments
• E-Start emergency jump start system
• Master power switch
• Waterproof Deutsch gauge plugin connectors
• Water/abrasion-resistant connectors
• Console-mounted 12V outlet

Trailer

• Custom-fit, tandem-axle NITRO® trailer powder-coated w/GALVASHIELD® Impact corrosion & chip protection for improved durability
• 7-pin connector
• 14" (35.56 cm) custom NITRO® aluminum wheels w/radial tires
• Integrated boarding step w/safety handle for easier boarding/reboarding at bow while boat is on trailer
• Surge disc brakes on 1 axle
• All-welded rectangular GALVASHIELD® frame
• Spare tire carrier (spare tire available at additional cost)
• Space-saving swing-away tongue to reduce storage length
• Heavy-duty winch w/non-binding nylon strap & bow safety strap
• Outboard motor support to reduce hull & transom stress while towing
• Steel fenders w/diamond-tread step plates
• Carpeted bunks & fender boards to protect hull
• Submersible LED lights
• Safety cables